Sony HDC4800 - Page 29

29
4 Select INSERT then press the MENU SEL knob/
ENTER button.
The selection screen appears.
5 Turn the MENU SEL knob/ENTER button to move the
arrow marker (,) to the desired page, then press the
MENU SEL knob/ENTER button.
This adds the number and name of the selected page
above the item selected in step 3.
To cancel addition of a page
Before pushing the MENU SEL knob/ENTER button in step 5,
turn the MENU SEL knob/ENTER button to move the arrow
marker (,) to “ESC” at the top right of the screen, then press
the MENU SEL knob/ENTER button.
The EDIT PAGE screen appears again.
To delete a page
Proceed as follows.
1 On the EDIT PAGE screen of the USER MENU
CUSTOMIZE menu, move the arrow marker (,) to the
page to be deleted, and press the MENU SEL knob/
ENTER button.
The EDIT FUNCTION screen appears.
2 Select DELETE then press the MENU SEL knob/
ENTER button.
The previously displayed page appears again, and the
message “DELETE OK? YES,NO” appears at the
upper right.
3 To delete, turn the MENU SEL knob/ENTER button to
move the arrow marker (,) to “YES,” and press the
MENU SEL knob/ENTER button.
To move a page
Proceed as follows.
1 Display the EDIT PAGE screen of the USER MENU
CUSTOMIZE menu. Turn the MENU SEL knob/ENTER
button to move the arrow marker (,) to the page that
you wish to move.
The EDIT FUNCTION screen appears.
2 Select MOVE then press the MENU SEL knob/ENTER
button.
The EDIT PAGE screen appears again.
3 Turn MENU SEL knob/ENTER button to move the
arrow marker (,) to the position to which you wish
to move the page selected in step 1.
4 Press the MENU SEL knob/ENTER button.
The page selected in step 1 is moved to the position
selected in step 3.
In the above example, <ZEBRA> moves to the “04”
position, and the <VF DISPLAY> and following pages
move down one line.
CONTENTS
xx
c
01.USER 1
02.USER 2
03.USER 3
04.USER 4
05.USER 5
06.USER 6
07.USER 7
08.USER 8
09.USER 9
10.USER 10
ESC
ITEM DELETE
DELETE OK? YES
c
NO
01.<VF OUT>
02.<VF DETAIL>
03.<FOCUS ASSIST>
z
04.<VF DISPLAY>
05.<'!' IND>
06.<VF MARKER>
07.<CURSOR>
08.<SPIRIT LEVEL>
09.<ZEBRA>
10.<SWITCH ASSIGN1>
ESC
ITEM MOVE
xx
01.<VF OUT>
02.<VF DETAIL>
03.<FOCUS ASSIST>
c
04.<VF DISPLAY>
05.<'!' IND>
06.<VF MARKER>
07.<CURSOR>
08.<SPIRIT LEVEL>
z
09.<ZEBRA>
10.<SWITCH ASSIGN1>
ESC