53
DIAGNOSIS Menu
This menu is for viewing only; camera settings cannot be made using this menu.
However, some items set the conditions for viewing.
<MATRIX FILE>
F07
CUSTOM PRESET
MATRIX
Stores matrix preset files:
Saved files can be loaded by setting PRESET of
<USER MATRIX> to CUSTOM 1 to 5.
STORE FILE
1 Execute using ENTER.
2 Execute using ENTER.
3 Execute using ENTER.
4 Execute using ENTER.
5 Execute using ENTER.
CLEAR ALL Execute using ENTER. Clears all the files.
READ (USB t CAM) Execute using ENTER. Loads five preset files from a USB drive to internal
memory.
WRITE (CAM t
USB)
Execute using ENTER. Writes five preset files in the camera’s memory to a
USB drive.
FILE ID Max. 16 characters Enters a comment for the preset files to be written to a
USB drive.
See “To specify a character string” (page 26).
CAM CODE Camera code Display only
DATE Date Display only
<FILE CLEAR>
F08
PRESET OPERATOR Execute using ENTER.
REFERENCE (ALL) Execute using ENTER.
10 SEC CLEAR ON, OFF
Sets the function to clear the selected menu item to
ON/OFF.
See “To return a menu item to its standard value”
(page 26).
OHB WHITE SHADE (ALL)
Execute using ENTER.
OHB BLACK SHADE Execute using ENTER.
OHB ND OFFSET Execute using ENTER.
OHB MATRIX Execute using ENTER.
DIAGNOSIS
Page name
Page No.
Item Indication Description
<OPTICAL LEVEL>
D01
CCU t BPU t CAM GREEN, YELLOW, RED, NG, NO SIGNAL Displayed only when a CCU or BPU is
connected.
CAM t BPU t CCU GREEN, YELLOW, RED, NG, NO SIGNAL Displayed only when a CCU or BPU is
connected.
CABLE LENGTH x.x km Displays the camera cable length.
(Displayed only when a CCU is connected.)
FILE
Page name
Page No.
Item Settings Description
To Next Page
Loading...
