Sony HDC4800 - Using a USB Drive

56
Using a USB Drive
You can connect a USB drive to the USB connector to save
and load the settings data file.
The following Sony USB drives are recommended.
•USM4GL
•USM4GM
•USM8GN
•USM8GL
•USM8GQ
•USM32GL
•USM32GLX
•USM32GN
•USM32GR
•USM32GQ
•USM64GLX
•USM64GP
•USM64GQ
•USM16GR
•USM8GT
•USM16GU
•USM4GV
•USM8GR
• USM8GQX
•USM32W
• USM16SA
•USM8X
• USB drives other than those recommended may not be
recognized when connected to the USB connector.
• USB drives must be formatted with the FAT16 or FAT32 file
system. Recommended Sony USB drives are preformatted,
and can be used without any prior setup.
NO USB FLASH DRIVE A USB drive operation was attempted
with no USB drive connected.
USB FLASH DRIVE
ERROR
An error occurred during access to a
USB drive.
FORMAT ERROR! A USB drive operation was attempted
with an unformatted USB drive.
WRITE PROTECTED File writing was attempted with a write-
protected USB drive.
FILE ERROR An error occurred while reading a file
from a USB drive.
OTHER MODEL’S FILE You attempted to read a file of other
models having no compatibility.
FILE NOT FOUND The file you attempted to read does
not exist in the USB drive.
Message Meaning
Notes