52
<REFERENCE>
F03
STORE FILE Execute using ENTER. Stores the current settings of the reference file items in
the reference file in internal memory.
STANDARD Execute using ENTER. Reads the standard values in the reference file in
internal memory.
ALL PRESET Execute using ENTER. Returns all settings stored in internal memory to the
factory-presets.
READ (USB t CAM) Execute using ENTER. Loads a reference file from a USB drive.
WRITE (CAM t USB) Execute using ENTER. Writes the current settings of the reference file items
as a reference file to a USB drive.
FILE ID Max. 16 characters Enters a comment for the reference file to be written to
a USB drive.
See “To specify a character string” (page 26).
CAM CODE Camera code Display only
DATE Date Display only
<USER GAMMA>
F04
READ (USB t CAM) Execute using ENTER. Reads the user gamma file from a USB drive.
PRESET Execute using ENTER. Sets the user gamma file items to the preset values in
internal memory.
FILE ID Max.16 characters Enters a comment for the user gamma file to be written
to a USB drive.
See “To specify a character string” (page 26).
CAM CODE Camera code Display only
DATE Date Display only
<LENS FILE>
F05
STORE FILE Execute using ENTER. The center marker is not included.
No. 1 to 17, 1
1 to 16: When using a non-serial lens (When using a
large lens, this setting depends on the internal
setting of the lens.)
17: When using a serial lens
NAME Changeable only when using a non-serial lens.
F NO F1.0 to F3.4, F1.7
Changeable only when using a non-serial lens.
CENTER MARKER Sets and stores the center marker position:
H POS: Increasing the value moves the position to the
right.
V POS: Increasing the value moves the position
downwards.
H POS –20 to +20, 0
V POS –20 to +20, 0
STORE Execute using ENTER.
<OHB FILE>
F06
STORE FILE Execute using ENTER. Stores the offset values of items specific to the CMOS
image sensor (once stored, the values do not need to
be stored again if the sensor is reinstalled).
FILE
Page name
Page No.
Item Settings Description