47
<MULTI MATRIX>
P14
PHASE 0
, 23, 45, 68, 90, 113, 135, 158,
180, 203, 225, 248, 270, 293,
315, 338
Selects an axis (angle) at PHASE for which the
multimatrix adjustment is to be made, and set HUE
and SAT (HUE and SAT can be set individually for
each of 16 axes).
HUE –99 to +99, 0
SAT –99 to +99, 0
ALL CLEAR Execute using ENTER.
GATE ON, OFF
, (SKN) (SKN): Displayed when SKIN GATE of <SKIN
DETAIL> is ON.
MATRIX ON, OFF
PRESET ---, ON, OFF
---
, SMPTE-240M, ITU-709,
SMPTE-WIDE, NTSC, EBU,
ITU-601, CUSTOM1, CUSTOM2,
CUSTOM3, CUSTOM4,
CUSTOM5
USER ---
, ON, OFF
MULTI ---
, ON, OFF
<SHUTTER>
P15
SHUTTER ON, OFF
, (ON), (OFF) Settings in ( ): When a remote control unit/panel or a
CCU is not connected (cannot be changed)
59.94P: 1/100
, 1/125, 1/250,
1/500, 1/1000, 1/2000, ECS
50P: 1/60, 1/125
, 1/250,
1/500, 1/1000, 1/2000, ECS
Step shutter selection
ECS FREQ 59.94P: 59.96
to 4600 Hz
50P: 50.03 to 4600 Hz
<NOISE
SUPPRESSION>
P16
SUPPRESSION 0
to 100%
ON, OFF
<FLICKER
REDUCTION>
P17
REDUCTION ON, OFF
Note
When you turn REDUCTION ON or OFF, noise may
be generated. This is not a malfunction.
POWER LINE
FREQUENCY
50
, 60
ACM TYPE 1, 2, 3, 4
Sets accumulated frames mode.
Set this mode in accordance with the flicker reduction
effect and motion lag.
PAINT
Page name
Page No.
Item Settings Description
To Next Page
Loading...
