Sony HT-A9 Help Guide

Help Guide
Home Theatre System
HT-A9
There is no picture or the picture is not output correctly.
Select the appropriate input.
When there is no picture while the TV input is selected, select the TV channel that you want using the TV remote
control.
When there is no picture while the HDMI input is selected, press the playback button of the connected device.
Disconnect an HDMI cable, then connect it again. Make sure that the cable is firmly inserted.
When there is no picture from the connected device or the picture from the connected device is not output correctly,
change the setting of
[Setup] - [Advanced Settings] - [HDMI Settings] - [HDMI Signal Format] - [HDMI IN].
The speaker system is connected to an input device that is not HDCP (High-bandwidth Digital Content Protection)
compliant. In this case, check the specifications of the connected device.
5-025-234-11(2)
Copyright 2021 Sony Corporation
104

Sony HT-A9 Specifications

General

Tweeter	Yes
Speaker type	Full range
Number of drivers	-
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	- channels
Number of tweeter drivers	2
Audio decoders	DTS, DTS-ES, DTS-HD HR, DTS-HD Master Audio, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby Dual Mono, Dolby TrueHD
RMS rated power	504 W
Bluetooth version	5.0
USB connector type	USB Type-A
USB 2.0 ports quantity	1
Connectivity technology	Wireless
Product color	Gray
Recommended usage	Home
Cables included	AC, HDMI
Quantity per pack	4 pc(s)
Package type	Box
Package depth	213 mm
Package width	725 mm
Package height	468 mm
Package weight	16000 g

Weight and Dimensions

Depth	147 mm
Width	160 mm
Height	313 mm