Note
If you perform [Start manual linking],
[Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [Link
mode] is set to [Manual] automatically.
Only the speakers for which [Connected] has been displayed in step 6 connect to the control box. If the connection of the
speakers cannot be established, perform the operation again from step 1.
5-025-234-11(2)
Copyright 2021 Sony Corporation
The connecting process appears on the TV screen.
To cancel the manual connection, select [Cancel].
When all the speakers display [Connected], select [Finish].
6
Press
(enter).
The manual connection is established and the power indicators of the speakers light in green.
7