Sony HT-A9 Help Guide

Help Guide
Home Theatre System
HT-A9
Setting up a Wired Connection
Note
If you select IPv6, you cannot use a fixed IP address.
5-025-234-11(2)
Copyright 2021 Sony Corporation
Use a LAN cable to connect the speaker system to a router.
1
Press HOME.
The home menu appears on the TV screen.
2
Select
[Setup] - [Advanced Settings] on the home menu.
3
Select [Network Settings] - [Internet Settings] - [Next].
4
Select the IP address setting method.
[Auto]: Obtains an IP address automatically.
[Manual]: Enter an IP address manually.
5
If you select [Manual], perform the setting by following the on-screen instructions.
The speaker system starts network settings.
6
When the network setting status appears, press
(up)/ (down) to browse information, and then press
(right).
7
56

Sony HT-A9 Specifications

General

Tweeter	Yes
Speaker type	Full range
Number of drivers	-
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	- channels
Number of tweeter drivers	2
Audio decoders	DTS, DTS-ES, DTS-HD HR, DTS-HD Master Audio, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby Dual Mono, Dolby TrueHD
RMS rated power	504 W
Bluetooth version	5.0
USB connector type	USB Type-A
USB 2.0 ports quantity	1
Connectivity technology	Wireless
Product color	Gray
Recommended usage	Home
Cables included	AC, HDMI
Quantity per pack	4 pc(s)
Package type	Box
Package depth	213 mm
Package width	725 mm
Package height	468 mm
Package weight	16000 g

Weight and Dimensions

Depth	147 mm
Width	160 mm
Height	313 mm