EasyManuals Logo

Sony HT-A9 Help Guide

Sony HT-A9
149 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
You can select the video format that can be received. If the picture and sound of the device connected to the speaker
system are not output correctly, change the [HDMI Signal Format] setting.
[Enhanced format (4K120, 8K)]: Select when both the connected TV and devices support high definition video formats
such as 4K 120p, 8K, etc.
[Enhanced format]: Select when both the connected TV and devices support high definition video formats such as 4K
60p 4:4:4, etc.
[Standard format]: Select when the connected TV and devices support standard definition video formats.
Note
Depending on the TV, the TV setting for HDMI output may be required. Refer to the operating instructions of the TV.
If the picture and sound are not output while [HDMI Signal Format] is set to [Enhanced format (4K120, 8K)], set it to [Enhanced
format] or [Standard format].
If the picture and sound are not output while [HDMI Signal Format] is set to [Enhanced format], set it to [Standard format].
For details on the video formats that can be received and the HDMI cable that can be used, see “Supported HDMI Video
Formats.”
[Video output for PIP/PBP-displayed TV]
[On]: When the TV input is selected on the speaker system, the picture from the HDMI input is output to the TV. To use
the Picture-in-Picture (PIP)/Picture-by-Picture (PBP) display of the TV, select [On] for this setting.
[Off]: When the TV input is selected on the speaker system, the picture from the HDMI input is not output to the TV.
5-025-234-11(2)
Copyright 2021 Sony Corporation
89

Table of Contents

Other manuals for Sony HT-A9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony HT-A9 and is the answer not in the manual?

Sony HT-A9 Specifications

General IconGeneral
TweeterYes
Speaker typeFull range
Number of drivers-
Speaker placementFloor, Tabletop/bookshelf
Audio output channels- channels
Number of tweeter drivers2
Audio decodersDTS, DTS-ES, DTS-HD HR, DTS-HD Master Audio, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby Dual Mono, Dolby TrueHD
RMS rated power504 W
Bluetooth version5.0
USB connector typeUSB Type-A
USB 2.0 ports quantity1
Connectivity technologyWireless
Product colorGray
Recommended usageHome
Cables includedAC, HDMI
Quantity per pack4 pc(s)
Package typeBox
Package depth213 mm
Package width725 mm
Package height468 mm
Package weight16000 g
Weight and Dimensions IconWeight and Dimensions
Depth147 mm
Width160 mm
Height313 mm

Related product manuals