Help Guide
Home Theatre System
HT-A9
Listening to Sound with Paired Headphones
To disconnect the paired headphones
Perform any of the following items.
Disable the BLUETOOTH function on the headphones.
Set
[Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode] to [Receiver] or [Off].
Turn off the speaker system or headphones.
Select the device name of the connected headphones from
[Setup] - [Advanced Settings] - [Bluetooth Settings]
- [Device List].
[Connected] of the device name disappears.
5-025-234-11(2)
Copyright 2021 Sony Corporation
Set the BLUETOOTH function of the headphones to on.
1
Press HOME.
The home menu appears on the TV screen.
2
Select
[Setup] - [Advanced Settings] on the home menu.
3
Select [Bluetooth Settings] - [Bluetooth Mode] - [Transmitter].
The speaker system enters BLUETOOTH transmission mode and the speaker system automatically reconnects to
the headphones that was most recently connected to.
4
Return to the home menu, select
[Watch] or [Listen], and select the input.
The image of the selected input appears on the TV screen, [BT TX] appears in the front panel display, then the
sound is output from the headphones.
Sound from the speaker system is muted at the same time.
5
Adjust the volume.
Adjust the volume level of the headphones first. Then, adjust the volume level of the headphones with
(volume) +/– on the remote control.
6
To Next Page
Loading...
Need help?
General
Weight and Dimensions
