Sony HT-A9 Help Guide

Help Guide
Home Theatre System
HT-A9
No sound is output from the speaker system.
Check that the AC power cords (mains leads) of the control box and speakers are connected securely.
If the power indicator of the speaker is turned off, try the following.
Check that the AC power cord (mains lead) of the speaker is connected securely.
Press
(power) on the bottom of the speaker to turn on the speaker.
If the power indicator on the speaker flashes slowly in green or lights in red, try the following.
Move the speaker to a location near the control box so that the power indicator on the speaker lights in green.
Connect the speaker and control box manually.
Check the status of the wireless connection in
[Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless
Speaker Settings] - [Check wireless connection].
It may take about 1 minute until the sound is output if
[Setup] - [Advanced Settings] - [Speaker Settings] -
[Wireless Speaker Settings] - [RF Channel] is switched from [Off] to [On].
Press
(volume) + on the remote control to increase the volume or cancel muting.
The speakers may be connected to another compatible device. Try manual connection.
Related Topic
If the Speakers Are not Connected Correctly
5-025-234-11(2)
Copyright 2021 Sony Corporation
111

Sony HT-A9 Specifications

General

Tweeter	Yes
Speaker type	Full range
Number of drivers	-
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	- channels
Number of tweeter drivers	2
Audio decoders	DTS, DTS-ES, DTS-HD HR, DTS-HD Master Audio, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby Dual Mono, Dolby TrueHD
RMS rated power	504 W
Bluetooth version	5.0
USB connector type	USB Type-A
USB 2.0 ports quantity	1
Connectivity technology	Wireless
Product color	Gray
Recommended usage	Home
Cables included	AC, HDMI
Quantity per pack	4 pc(s)
Package type	Box
Package depth	213 mm
Package width	725 mm
Package height	468 mm
Package weight	16000 g

Weight and Dimensions

Depth	147 mm
Width	160 mm
Height	313 mm