Sony HT-A9 Help Guide

Help Guide
Home Theatre System
HT-A9
About the Connection of the Headphones
You may not be able to adjust the volume level depending on the BLUETOOTH compatible headphones.
Input of BLUETOOTH is disabled when
[Setup] - [Advanced Settings] - [Bluetooth Settings] - [Bluetooth Mode]
is set to [Off] or [Transmitter].
You can register up to 9 BLUETOOTH devices. If a 10th BLUETOOTH device is registered, the oldest connected
BLUETOOTH device will be overwritten by the new one.
The speaker system can display up to 15 detected BLUETOOTH devices in the [Device List].
You cannot change the sound effect or settings while transmitting sound to the BLUETOOTH compatible
headphones.
Playback of audio/music on the BLUETOOTH device is delayed compared to that on the speaker system due to the
characteristics of BLUETOOTH wireless technology.
You can enable or disable the reception of LDAC audio from the BLUETOOTH device in [Bluetooth Settings].
5-025-234-11(2)
Copyright 2021 Sony Corporation
49

Sony HT-A9 Specifications

General

Tweeter	Yes
Speaker type	Full range
Number of drivers	-
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	- channels
Number of tweeter drivers	2
Audio decoders	DTS, DTS-ES, DTS-HD HR, DTS-HD Master Audio, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby Dual Mono, Dolby TrueHD
RMS rated power	504 W
Bluetooth version	5.0
USB connector type	USB Type-A
USB 2.0 ports quantity	1
Connectivity technology	Wireless
Product color	Gray
Recommended usage	Home
Cables included	AC, HDMI
Quantity per pack	4 pc(s)
Package type	Box
Package depth	213 mm
Package width	725 mm
Package height	468 mm
Package weight	16000 g

Weight and Dimensions

Depth	147 mm
Width	160 mm
Height	313 mm