Sony HT-A9 Help Guide

Help Guide
Home Theatre System
HT-A9
Listening to Music by Pairing the Mobile Device That Is Connected for the First Time
To use the BLUETOOTH function, you need to perform pairing of the speaker system and mobile device in advance.
Press and hold the BLUETOOTH button for 2 seconds.
1
Make sure that [PAIRING] appears in the front panel display.
The speaker system enters the pairing mode.
2
On the mobile device, search the speaker system by performing the pairing operation.
The list of the BLUETOOTH devices that are detected appears on the screen of the mobile device.
For the operation method to pair the BLUETOOTH device to the mobile device, refer to the operating instructions of
the mobile device.
3
Pair the speaker system and mobile device by selecting “HT-A9” from the list on the screen of the mobile
device.
If a passkey is requested, enter “0000.”
4
Make sure that [BT] appears in the front panel display.
A connection between the speaker system and mobile device has been established.
5
42

Sony HT-A9 Specifications

General

Tweeter	Yes
Speaker type	Full range
Number of drivers	-
Speaker placement	Floor, Tabletop/bookshelf
Audio output channels	- channels
Number of tweeter drivers	2
Audio decoders	DTS, DTS-ES, DTS-HD HR, DTS-HD Master Audio, Dolby Atmos, Dolby Digital, Dolby Digital Plus, Dolby Dual Mono, Dolby TrueHD
RMS rated power	504 W
Bluetooth version	5.0
USB connector type	USB Type-A
USB 2.0 ports quantity	1
Connectivity technology	Wireless
Product color	Gray
Recommended usage	Home
Cables included	AC, HDMI
Quantity per pack	4 pc(s)
Package type	Box
Package depth	213 mm
Package width	725 mm
Package height	468 mm
Package weight	16000 g

Weight and Dimensions

Depth	147 mm
Width	160 mm
Height	313 mm