18
HVR-A1E/A1P 2-639-668-11(1)
To eject a “Memory Stick Duo”
Lightly push the “Memory Stick Duo” in
once.
• When the access lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
• Make sure that the “Memory Stick Duo” does
not pop up and drop off when inserting and
removing it from your camcorder.
Step 7: Inserting a tape or a “Memory Stick Duo” (Continued)
To Next Page
Loading...
