EasyManua.ls Logo

Sony HVR-A1E - Connection and Computer Issues

Sony HVR-A1E
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
95
Troubleshooting
HVR-A1E/A1P 2-639-668-11(1)
Continued
Still pictures cannot be dubbed from a tape to a “Memory Stick Duo.
You cannot record or a distorted picture may be recorded if the tape has been used repeatedly
for recording.
You cannot input pictures.
You cannot input pictures while [DISP OUTPUT] is set to [V-OUT/PANEL] (p. 65).
You cannot input pictures if you press DISPLAY/BATT INFO.
Connecting to a computer
The computer does not recognize your camcorder.
Disconnect the cable from the computer and camcorder, then connect it again securely.
Disconnect USB devices other than the keyboard, the mouse, and the camcorder from the
(USB) jack on the computer.
Disconnect the cable from the computer and camcorder, restart the computer, then connect
them again correctly.
You cannot monitor video that the camcorder is capturing.
Disconnect the cable from the computer, turn on the camcorder, then connect it again.
You cannot view the video recorded on a tape on the computer.
Disconnect the cable from the computer, then connect it again.
Connect the i.LINK cable (optional) because you cannot copy pictures with the USB cable
(supplied).
You cannot view the video and still images recorded on a “Memory Stick Duo”
on the computer.
Insert a “Memory Stick Duo” in the correct direction, then push it all the way in.
You cannot use an i.LINK cable (optional). Connect the camcorder and the computer using
the USB cable (supplied).
The computer does not recognize the “Memory Stick Duo” during camcorder operations
such as tape playback or editing. Finish any camcorder operations before connecting the
camcorder to the computer.
Slide the POWER switch down to turn on the PLAY/EDIT lamp, then set [USB SELECT] to
[MEMORY STICK].
[Removable Disk] does not appear on the computer screen.
Slide the POWER switch down to turn on the PLAY/EDIT lamp, then set [USB SELECT] to
[MEMORY STICK].
Insert a “Memory Stick Duo” into your camcorder.
Disconnect the USB device other than the keyboard, the mouse, and the camcorder from the
(USB) jack on the computer.

Table of Contents

Related product manuals