Sony LBT-D117CD - Technical Specifications; Power and Tuner Specs; Amplifier, Cassette, and CD Specs

AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
with 6 ohm loads both channel driven, from
40 - 20,000 Hz; rated 15 watts per channel
minimum RMS power, with no more than
0.5% total harmonic distortion from 250
milliwatts to rated output.
Tuner
System
FM tuner section
Tuning range
Antenna
Intermediate frequency
AM tuner section
Tuning range
Antenna
Intermediate frequency
Amplifier
Input
Jack type
Sensitivity
Impedance
VIDEO Phono
300 mV
47 kilohms
PHONO Phono 3 mV
47 kilohms
FM stereo
FM/AM superheterodyne tuner
87.5 to 108 MHz
300 ohms balanced
75 ohms unbalanced
10.7 MHz
530 to 1,710 kHz
AM loop antenna
External antenna terminal
450 kHz
Output Jack type
Impedance
HEADPHONES
Stereo phone
Accepts headphones of
8 ohms or more
Frequency response VIDEO: 15 Hz to 50 kHz !§dB
General
Power requirements
Power consumption
Weight
Dimensions
120 VAC, 60 Hz
85 W
Approx. 8.6 kg (18 lb 15 oz)
Approx. 355 x 380 x 325 mm
(14 x 15 x 12 7 /a inches)
(w/h/d, including projections)
Speaker systems
Speaker system
Weight
Dimensions
3-way
Approx. 4.3 kg (9 lb 7 oz), per
speaker
Approx. 260 x 441 x 175 mm
(10V« x 173/8x7 inches)(w/h/d)
Accessaries supplied
Remote commander RM-S171 (1)
Batteries Sony SUM-3 (NS) (2)
FM wire antenna (1)
AM loop antenna (1)
Design and specifications are subject to change without
notice.
Cassette deck
Recording system 4-track 2-channel stereo
Frequency response DOLBY NR OFF
With Type II cassette (Sony UX-S)
40 Hz to 14 kHz (±3 dB)
With Type I cassette (Sony HF-S)
40 Hz to 13 kHz (±3 dB)
Wow and flutter 0.1 % (WRMS)
Compact disc player
Frequency response
Signal-to-noise ratio
Dynamic range
Harmonic distortion
Channel separation
2 Hz to 20 kHz ±0.5 dB
More than 93 dB
More than 90 dB
Less than 0.008% (1 kHz)
More than 90 dB (1 kHz)