Sony LBT-D117CD - Preparations; Remote Commander Setup; Precautions; Operating Precautions

Table of Contents
Getting Started
Configuration.2
Precautions.3
Preparations.3
Connections.4
Using Your Stereo
Turning on the power.6
Basic sound adjustments.6
Receiving broadcasts.8
Playing back tapes.10
Recording on tapes.11
Dubbing tapes.13
Playing compact discs.14
Playing in a random order.17
Playing in a desired order and time.18
Playing the beginning of each selection.19
Playing repeatedly.20
Recording the program.21
Designating the total playing time.22
Tips on editing tapes.24
General
Maintenance.26
Specifications.27
Troubleshooting guide.28
Location of controls.30
Precautions
Before operating the system, read the following precautions
carefully
• Operate the unit only on 120 V AC, 60 Hz.
• Unplug the system from the wall outlet if it is not to be used
for an extended period of time. To disconnect the cord, pull
it out by grasping the plug. Never pull the cord itself.
• Should any solid object or liquid fall into the unit, unplug the
unit and have it checked by qualified personnel before any
further operation.
• The nameplate indicating operation voltage, power
consumption, etc. is located at the rear.
• As the laser beam use in this unit is harmful to the eyes, do
not attempt to disassemble the cabinet. Refer servicing to
qualified personnel only.
• AC power cord must be changed at a qualified service
shop.
If you have any questions or problems concerning your
system, please consult your nearest Sony dealer.
Preparations
You can control the system (except the cassette deck) with
the supplied remote commander.
Remote Commander
Insert two size AA (R6) batteries with the correct polarity.
Battery life
About half a year of normal operation can be expected when
using Sony SUM-3 (NS) batteries.
When the batteries are exhausted, the commander can no
longer operate the unit. Replace both batteries with new
ones.
To avoid battery leakage
When the commander is not to be used for a long period of
time, remove the batteries to avoid damage caused by
battery leakage and corrosion.
To avoid malfunction of the remote commander, avoid
keeping the commander in extremely hot or humid locations.
For detailed precautions, see the leaflet “IMPORTANT
SAFEGUARDS".