Sony LBT-D117CD - Station Memory; Storing Stations; Tuning Stored Stations

You can store station frequencies in the unit’s memory for quick recall later on. Up to
30 frequencies in any band can be stored by specifying a code for each frequency.
The code is a combination of a letter - A, B or C - and a number - 0 to 9: A-1, A-2,
..., A-9, A-0, B-1,..., C-1,..., C-0.
Storing Stations
4 Press a numeric button to select a number (0 - 9).
A code is specified and the setting of the ST/MUTE
button is also stored.
1 2 3 4 5
If you cannot store a station successfully
Be sure to press the buttons for the code while the
“MEMORY" indication is displayed. If the indication has gone
off, press the MEMORY button again.
To erase a stored station
Storing a new station on a used code erases the previously
stored one.
Tuning into a Stored Station Directly
Press the SHIFT button and the numeric button to specify
the code for the desired station.