What to do if the feed from a device connected to the Sony Computer Accessories base station is not displayed?
If the video feed from a device connected to your Sony Computer Accessories base station isn't showing, first double-check that all peripheral devices are correctly connected to the base station. Also, ensure that the provided IR Blaster is correctly installed and that the on-screen remote control is correctly configured.
What to do if I cannot establish a connection with the Sony Computer Accessories base station?
If you cannot establish a connection with the Sony Computer Accessories base station, ensure the base station is powered on. Verify that the base station domain name or static IP address are correct. Also, ensure your computer is connected to a network and has internet access. Check that your network environment meets the requirements for the NetAV function and that updating dynamic DNS is not failing. If using a firewall, ensure NetAV uses port 5021. Note that you cannot connect while another monitor is connected by NetAV. Finally, verify that the device is registered and that its registration information hasn't been deleted from the [Register Other Monitors] screen on the base station.
Why does the NetAV connection break off suddenly on my Sony Computer Accessories?
If the NetAV connection for your Sony Computer Accessories breaks off suddenly, it might be due to your software's firewall blocking NetAV. Consider if any security software, like anti-virus or anti-spam programs, have been installed recently. Also, check if the message “AV connection started by other monitor” appears. If [Allow AV interception by registered monitors] is selected on the [Register Other Monitors] screen of the LF-X1/LF-X5, you can watch video by selecting [Connect] again. If this option is not selected, a NetAV connection cannot be established while video is being watched on the LF-X1/LF-X5 monitor.
Why can't I display the on-screen remote control or click [Remote] on my Sony Computer Accessories?
If the on-screen remote control for your Sony Computer Accessories isn't displaying or you can't click the [Remote] button, first ensure the supplied IR Blaster is correctly installed and the on-screen remote control is correctly configured. Also, verify the on-screen remote control is correctly configured in the LocationFree Player settings screen.
How to fix distorted picture on Sony Computer Accessories?
If the picture is distorted when using your Sony Computer Accessories, try updating to the newest display driver provided by the maker of your monitor.
Why does the Sony Computer Accessories remote control respond as if the button were pushed several times?
If the remote control responds as though the button were pushed several times with a single button push on your Sony Computer Accessories, make sure you're not holding down the mouse button too long when clicking. Also, verify that the specified rate is not too high in relation to the actual line speed.
Why the Settings button or Vol button does not appear on Sony Computer Accessories?
If the Settings or Vol button does not appear on your Sony Computer Accessories, it may be because the window size is too small, and some buttons may not be shown.
What to do if assigned channels do not display on Sony Computer Accessories?
If assigned channels do not display on your Sony Computer Accessories, try changing the CABLE ON/OFF setting.
What to do if video does not appear when selecting TV, Video 1, or Video 2 on Sony Computer Accessories?
If video does not appear when you select TV, Video 1, or Video 2 in the [INDEX] window and click [Connect] on your Sony Computer Accessories, and you are not using the LocationFree TV internal tuner, you must use the remote control to display video.
Explains the software application for streaming video over the internet using NetAV.
Details the necessary hardware, software, and network conditions for using the LocationFree Player.
Guides through the process of installing the LocationFree Player software on your computer.
Details essential one-time computer and base station configurations for remote access.
Covers getting the base station ready and registering your computer with it.
Steps to connect your computer to the internet and base station remotely.
Guides on setting up and using the on-screen remote for TV and video devices.
Instructions on starting, quitting, and navigating the remote viewing experience.
Details on selecting TV channels and adjusting audio volume.
Covers using the on-screen remote, SAP, and changing streaming rates.
Instructions for setting up wired and wireless LAN connections for home viewing.
Details on using mouse clicks and keyboard shortcuts for various functions.
Provides solutions for problems encountered during setup and operation.
Procedure for uninstalling the LocationFree Player software from your computer.
General| Brand | Sony |
|---|---|
| Model | LFA-PC1 |
| Category | Accessories |
| Language | English |
To Next Page
