Hint
You can use Amazon Alexa when you are wearing only one unit to which Amazon Alexa is assigned on your ear. When Amazon
Alexa is assigned to the headset and you are using only one headset unit, use the headset unit with Amazon Alexa assigned.
Check the setting of the headset with the “Sony | Sound Connect” app.
Check or update the software version of the headset with the “Sony | Sound Connect” app.
When Amazon Alexa is not available for reasons such as not being connected to the network, the voice guidance “Either your
mobile device isn’t connected; or you need to open the Alexa App and try again” is heard from both headset units (or from the
headset unit you are wearing).
Note
When you set up the headset on the Amazon Alexa app, which function on the left or right headset unit is set as Amazon Alexa
depends on the settings for the headset functions and usage conditions. If Amazon Alexa is assigned to either headset unit and
the assignment is switched to the other headset unit, the function of the unit on the side before the change will return to the
factory settings (play/pause music, etc.). You can restore the unit back to its previous functions by changing its settings on the
“Sony | Sound Connect” app.
Amazon Alexa and Google Assistant cannot be assigned to the headset at the same time.
Amazon Alexa is not available in certain languages, countries, and regions. Alexa features and functionality may vary by location.
For details on the services provided by other companies such as Google Assistant or Amazon Alexa, consult each service
provider directly.
Sony shall assume no responsibility for any problems such as misunderstandings related to the services provided by other
companies.
5-056-451-11(2) Copyright 2024 Sony Corporation
On the [Which device would you like to set up?] screen, select [Headphones].2.
From [AVAILABLE DEVICES] on the [Select your device] screen, select [LinkBuds Open].
If you cannot find [LinkBuds Open] in [AVAILABLE DEVICES], the headset is not connected to the smartphone via
Bluetooth connection. Connect the headset to the smartphone via Bluetooth connection.
3.
On the [Set up Alexa on your LinkBuds Open] screen, touch [CONTINUE].4.
If the [This will override the current voice assistant on this accessory] screen appears, touch [CONTINUE].5.
On the [Setup Complete] screen, touch [DONE].
Once the initial setup is complete, the function of the left headset unit (or the right headset unit if only the right
headset unit was worn for the initial setup) is changed to Amazon Alexa.
6.
To Next Page
Loading...
