20
GB
Basic Operations
Starting up M-crew
, In the Start menu, point to “Programs” and “M-crew”, and
then click “M-crew.”
The software starts up and the M-crew Main bar appears.
The bar below is displayed immediately after M-crew is started up.
The following description assumes that M-crew is running on the
computer to which the CMT-C7NT is connected as a system stereo
component.
Notes
• During MD recording, a dialog box appears to prompt you to stop
recording or to start up M-crew.
• M-crew (ver. 2.0E) and Net MD-enabled OpenMG Jukebox cannot be
active simultaneously.
To Next Page
Loading...
