Sony MDX-CA680 - SECTION 2 DISASSEMBLY; 2-1. DISASSEMBLY FLOW

MDX-CA680/CA680X
10
FRONT PANEL ASSY
(Note 3)
2-9. LO MOTOR ASSY (LOADING) (M903)
(Page 14)
2-10. LEVER (LE23) ASSY
(Page 14)
2-11. HOLDER ASSY
(Page 15)
2-12. CHUCKING ARM ASSY
(Page 15)
2-13. OPTICAL PICK-UP (KMS-241C)
(Page 16)
2-14. SL MOTOR ASSY (SLED) (M902),
SP MOTOR ASSY (SPINDLE) (M901)
(Page 16)
2-2. SUB PANEL ASSY
(Page 10)
2-3. MECHANISM DECK (MG-164MA-138)
(Page 11)
2-4. MAIN BOARD
(Page 11)
2-6. SERVO BOARD
(Page 12)
2-7. MD COVER ASSY
(Page 13)
2-5. HEAT SINK
(Page 12)
2-8. FLOAT BLOCK
(Page 13)
SET
Note 1: The process described in can be performed in any order.
Note 2: Without completing the process described in , the next process can not be performed.
Note 3: Illustration of disassembly is omitted.
• This set can be disassembled in the order shown below.
2-1. DISASSEMBLY FLOW
SECTION 2
DISASSEMBLY
Note: Follow the disassembly procedure in the numerical order given.
2-2. SUB PANEL ASSY
1 screw
(PTT2.6
× 4)
2 cove
r
4 claw
3 screw
(PTT2.6
× 6)
3 two screws
(PTT2.6
× 6)
3 screw
(PTT2.6
× 6)
5 sub panel assy
4 two claws
6 flexible flat (14 core) cable
(CN701)