Sony MDX-CA680 - MD Cover Assy; Float Block

MDX-CA680/CA680X
13
2-7. MD COVER ASSY
2-8. FLOAT BLOCK
3 MD cover assy
2 Pushing the cassette holder in the direction of the arrow A with a
screwdriver, etc., disengage the shaft (MD cover guide) from
the slot in the MD cover assy.
Note: Take care not to scratch the optiocal pick-up when pushing
the cassette holder with a screwdriver. etc.
shaft (MD cover guide)
cassette holder
A
1 four screws
(BVTT2 × 4
)
1 tension spring (float B)
6 float block
1 tension spring (float B)
2 two tension springs (float F)
3 Pushing an arrow A part, raise the float block
up ward at the front to release a lock.
A
4
float block
lever (lock R)
lever (lock L)
5 two dampers assy
5 two dampers assy