MHC-V3/V4D
71
Pin No. Pin Name I/O Description
163 Vss - Ground terminal
164 MTK-POWER-CTRL O Power Control pin for MTK
165 C-CONT O Trigger port to start charging of SPM
166 Q-Flash-SIO2 I/O Two-way serial data with to the serial fl ash
167 Q-Flash-SIO3 I/O Two-way serial data with to the serial fl ash
168 Q-Flash-CLK O Serial data transfer clock signal output to the serial fl ash
169 Q-Flash-CS O Chip select signal output to the serial fl ash
170 Q-Flash-SIO0 I/O Two-way serial data with to the serial fl ash
171 Vss - Ground terminal
172 Q-Flash-SIO1 I/O Two-way serial data with to the serial fl ash
173 MIC-DETECT I Mic Input Detection pin. “H”: Mic detected
174 PVcc - Power supply terminal (+3.3V)
175 NC - Not used
176 NC - Not used
Ver. 1.1
To Next Page
Loading...
