26
Using a memory card (not supplied) (continued)
Compatible memory cards
You can use the following memory cards with
the linear PCM recorder.
SD cards up to 2 GB: supported
SDHC cards from 4 GB to 32 GB: supported
SDXC cards 48 GB or more: not completely
supported*
1
Memory Stick PRO Duo and Memory Stick
PRO-HG Duo
cards up to 32 GB: supported*
2
*
1
To use this card on a PC running Windows XP, you
need to install Microsoft Update KB55704. For
details, consult the PC manufacturer.
When you connect your linear PCM recorder via a
USB cable to an AV device that does not support
exFAT*, you cannot import or play data from the
device. Before connecting, check that the AV device
supports exFAT. If it does not support exFAT, a
message instructing you to format your linear PCM
recorder may appear. Never format the linear PCM
recorder. Doing so will erase all the recorded data.
* exFAT is a file system used in the SDXC memory
card.
*
2
The linear PCM recorder supports Memory Stick
PRO Duo
and Memory Stick PRO-HG Duo only.
Any other type of Memory Stick
is not supported.
Due to the file system specifications of the
linear PCM recorder, you can record LPCM/DSD
files smaller than 2 GB and MP3 files smaller
than 1 GB using a memory card.
Notes
Operation of all types of compatible memory cards
is not guaranteed.
During recording and playback, do not remove or
insert a memory card, do not remove batteries, do
not disconnect an AC adaptor (not supplied), or do
not disconnect or connect the USB cable. Doing so
may damage the data.
To remove the memory card
Be sure that the ACCESS indicator light is off,
and then push the memory card into the
recorder. When it pops out, remove it from the
memory card slot.
Note
When “Please wait” appears on the display or the
ACCESS indicator flashes, the recorder is accessing
memory. During this time, do not remove or insert a
memory card, do not remove batteries, do not
disconnect an AC adaptor (not supplied), or do not
disconnect or connect the USB cable. Doing so may
damage the data.
Switching the memory
1
Press and hold the HOME/BACK
button for 1 second or more to return
to the HOME menu, then select
“
Settings” “Common Settings”
”Select Memory,” and then press
the
button.
The “Select Memory” window is displayed.
2
Press and to select “Built-In
Memory” or “Memory Card,” and then
press the
button.
The memory is switched to the selected
memory.
Folder and file structure
The structure of these folders and files differs
from that of the built-in memory.
For details about the specifications of the
folders and files, see pages 64, 65.
To Next Page
