45
Recording
When the built-in memory or a memory
card currently being used becomes full
during recording, the linear PCM recorder
automatically switches its destination to the
other memory media and continues recording
(Cross-Memory Recording).
1
In the stop mode, press and hold
the HOME/BACK button for 1 second
or more, select “
Settings”
“Recording Settings” “Cross-
Memory Recording,” and then press
the
button.
The “Cross-Memory Recording“ menu is
displayed.
2
Press and to select “ON,” and then
press the
button.
3
Start recording.
When the current memory media becomes
full during recording, “Switch memory and
continue recording” appears in the window.
Recording continues as a new file in the
recordable folder with the earliest folder
number available on the other memory
media.
Notes
If the other memory media is also full, a message
is displayed and the linear PCM recorder stops
recording.
When you play the original file recorded with cross-
memory recording, the linear PCM recorder does not
play the other file automatically.
Cross-memory recording will not work if you insert
a memory card into the linear PCM recorder during
recording.
You cannot set “Cross-Memory Recording” during
playback. To set this function, stop the linear PCM
recorder.
When you record a file by using the Cross-Memory
Recording function, part of recorded sound may be
interrupted after the memory is switched.
Recording across memory media
(Cross-Memory Recording)
To Next Page
