Portable Headphone Amplifier
PHA-3
How to use the silicone belts
You can fasten a connected device to the headphone amplifier using the silicone belts (supplied).
1. Mount the connected device on the headphone amplifier.
2. Bind the headphone amplifier and the connected device using the silicone belt with its wider part placed under the
bottom of the headphone amplifier.
4 silicone belts are supplied.
If the connected device does not fit on the rubber rails
If the audio device does not mount on the rubber rails of the headphone amplifier, place the protection sheet (supplied)
between the headphone amplifier and the audio device to avoid scratching.
Note
Help Guide
How to Use
To Next Page
Loading...
