The following settings of your WALKMAN may be causing the sound distortion. Set these settings off to solve the
problem.
Dynamic Normalizer
Equalizer
VPT (Virtualphones Technology)
DSEE (Digital Sound Enhancement Engine)
Speaker output optimizer
Sound is not output from the headphone jack of the WALKMAN when it is connected to the headphone amplifier.
You cannot adjust the volume by the WALKMAN when it is connected to the headphone amplifier.
The WALKMAN cannot be charged while it is connected to the headphone amplifier.
If you are listening to music too loudly, the battery may drain even if the DC IN 5V port of headphone amplifier is
connected to a computer or an AC outlet.
Related Topic
Connecting to WALKMAN models unsupported by digital-out
Compatible WALKMAN models
4-547-524-11(4)
Copyright 2014 Sony Corporation
To Next Page
Loading...
