Basic Operations6
GB
Listening to the radio
For hookup instructions, see pages 37 - 41 (PMC-DR50L) or
pages 42 - 47 (PMC-DR70L).
1 Press BAND until the band you
want appears in the display
(direct power-on).
2 Hold down TUNE TIME SET + or
– (TUNE + or – on the remote)
until the frequency digits begin to
change in the display.
The player automatically scans
the radio frequencies and stops
when it finds a clear station.
If you cannot tune in a station,
press the button repeatedly to
change the frequency step by
step.
Display
21
Indicates an FM
stereo broadcast.
To Next Page
Loading...
