Sony PMW-1000 - Non-Audio Input (M372); In Level (M373)

4-5-5. NON-AUDIO INPUT (M372)
This menu is used to select whether to handle digital audio signals as non-audio signals during recording.
audio [audio]: The signal is handled as linear PCM audio signals.
data [data]: The signal is handled as non-audio signals.
Menu hierarchy
[M3 : OTHERS]
[M37 : AUDIO CONFIG]
[M372: NON-AUDIO INPUT]
[tr1/tr2]
[tr3/tr4]
[tr5/tr6]
[tr7/tr8]
Procedure
1. Select NON-AUDIO INPUT.
2. Select [tr1/tr2], [tr3/tr4], [tr5/tr6] or [tr7/tr8].
3. Modify set values with the [PUSH SET] knob.
4. Press the [F5(SAVE)] button to save the settings.
MAINTENANCE MENU
M3:OTHERS
M37:AUDIO CONFIG
M372:NON-AUDIO INPUT
tr1/tr2 :audio
* audio
data
4-5-6. IN LEVEL (M373)
This menu is used to set the reference level when inputting analog audio signals from the ANALOG AUDIO INPUT 1
and ANALOG AUDIO INPUT 2 connectors.
+4dB, 0dB, -3dB, -6dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i/50P/25P.
Menu hierarchy
[M3 : OTHERS]
[M37 : AUDIO CONFIG]
[M373 : IN LEVEL]
[CH1/3/5/7]
[CH2/4/6/8]
Procedure
1. Select IN LEVEL.
2. Select [CH1/3/5/7] or [CH2/4/6/8].
3. Modify set values with the [PUSH SET] knob.
PMW-1000
4-13