Sony PMW-1000 - Frmt Media (M395); Vdcp Status Mode (M398)

3. Press the [F5(SAVE)] button to save the settings.
MAINTENANCE MENU
M3:OTHERS
M39:OTHER CONFIG
M391:VITC REC : dis
* DISABLE
ENABLE
4-5-9. FRMT MEDIA (M395)
This menu is used to set whether to disable the Format Media command of the Clip Menu.
DISABLE [dis]: The Format Media command is disabled.
ENABLE [ena]: The Format Media command is enabled.
Menu hierarchy
[M3 : OTHERS]
[M39 : OTHER CONFIG]
[M395 : FRMT MEDIA]
Procedure
1. Select FRMT MEDIA.
2. Modify set values with the [PUSH SET] knob.
3. Press the [F5(SAVE)] button to save the settings.
MAINTENANCE MENU
M3:OTHERS
M39:OTHER CONFIG
M395:FRMT MEDIA :ena
DISABLE
* ENABLE
4-5-10. VDCP STATUS MODE (M398)
This menu is used to set whether to reflect operations from the front panel and the network remote controller in the
VDCP status.
VDCP [vdcp]: Only VDCP operation is reflected.
VDCP/FP/NetRMT [all]: FP and NetRMT operations are reflected.
Menu hierarchy
[M3 : OTHERS]
[M39 : OTHER CONFIG]
[M398 : VDCP STATUS MODE]
Procedure
1. Select VDCP STATUS.
2. Modify set values with the [PUSH SET] knob.
3. Press the [F5(SAVE)] button to save the settings.
MAINTENANCE MENU
M3:OTHERS
M39:OTHER CONFIG
M398:VDCP STATUS: all
VDCP
* VDCP/FP/NetRMT
PMW-1000
4-15