Sony PMW-1000 - Package Update (M3 E3); Log Upload (M3 E4)

Menu hierarchy
[M3 : OTHERS]
[M3E : USB MEMORY UTIL]
[M3E2 : FORMAT USB MEM]
Procedure
1. Insert the USB memory into the USB connector on the front panel.
2. Select FORMAT USB MEM.
3. Press the [F5(SET)] button to start formatting the USB memory.
MAINTENANCE MENU
M3E2:FORMAT USB MEM
FORMAT OK?
CANCEL : F1(RETURN)
EXECUTE : F5(SET)
4. Upon completion of formatting, a message "COMPLETED" appears.
MAINTENANCE MENU
M3E2:FORMAT USB MEM
COMPLETED
TO MENU : MENU KEY
4-5-19. PACKAGE UPDATE (M3E3)
This menu is used to update the firmware.
Menu hierarchy
[M3 : OTHERS]
[M3E : USB MEMORY UTIL]
[M3E3 : PACKAGE UPDATE]
Tip
For how to update the firmware, refer to “1-12. Updating the Firmware”.
4-5-20. LOG UPLOAD (M3E4)
This menu is used to copy the log of the operating conditions to the USB memory connected to the USB connector on
the front panel.
Menu hierarchy
[M3 : OTHERS]
[M3E : USB MEMORY UTIL]
[M3E4 : LOG UPLOAD]
Procedure
1. Insert the USB memory into the USB connector on the front panel.
PMW-1000
4-21