Menu List
149
Chapter 6 Menu and Detailed Settings
Settings in bold are the factory default values.
FILE Menu
FILE
Menu items Sub-item Settings Description
User
Makes settings for
operating user files.
User Load SxS Execute/Cancel Loads a user file from an SxS
memory card (execute by selecting
[Execute]).
When Load Customize Data is set
to [Off]: Replace the current
USER menu settings with
settings stored in the loaded use
file (with the original menu
configuration unchanged).
When Load Customize Data is set
to [On]: Replace the current
USER menu configuration and
settings with those stored in the
loaded use file.
When User Load White is set to
[Off]: Load a user file
excluding white balance data.
User Load White is set to [On]:
Load a user file including white
balance data.
User Save SxS Execute/Cancel Stores the current USER menu
configuration and settings including
the white balance data to an SxS
memory card as a user file (execute
by selecting [Execute]).
User Load USB (in UDF mode only) Loads a user file from a USB flash
drive (execute by selecting
[Execute]).
User Save USB (in UDF mode only) Stores the current USER menu
configuration and settings including
the white balance data to a USB
flash drive as a user file (execute by
selecting [Execute]).
File ID Assigns a name to a file. Names can
be up to 16 characters in length.
Recall User Preset Execute/Cancel Returns the current USER menu
settings to the preset values (execute
by selecting [Execute]).
Store User Preset Execute/Cancel Stores the USER menu as a user file
in which all menu settings are reset
to the preset values (execute by
selecting [Execute]).
Clear User Preset Execute/Cancel Returns the current USER menu
settings to the factory default
settings (execute by selecting
[Execute]).
To Next Page
Loading...
