Protection of the Setting Values
16
Turn the menu selection control to select the item,
then press the menu selection control.
The item to be changed is displayed in yellow.
If the menu consists of multiple pages, turn the
menu selection control to go to the desired menu
page.
4
Make the setting or adjustment on an item.
When changing the adjustment level:
To increase the number, turn the menu selection
control right.
To decrease the number, turn the menu selection
control left.
Press the menu selection control to confirm the
number, then restore the original screen.
When changing the setting:
Turn the menu selection control to change the
setting, then press the menu selection control to
confirm the setting.
When returning the adjustment or setting to the
previous value:
Press the BACK button before pressing the menu
selection control.
An item displayed in black cannot be accessed.
You can access the item if it is displayed in white.
If the [Key Inhibit] has been turned [On], all
items are displayed in black. To change any of the
items, turn the [Key Inhibit] to [Off] first.
If the [Password Lock] has been turned [On], the
setting values of the color temperature for [User1]
and the User Preset for [User Preset1] cannot be
changed. To change the values, enter the
password.
For details on the key inhibit and password lock
functions, see “[Security] menu” (page 32).
To return the display to the previous screen
Press the BACK button.
To clear the menu
Press the MENU button.
The menu disappears automatically if a button is not
pressed for one minute.
About the memory of the settings
The settings are automatically stored in the monitor
memory.
Protection of the Setting
Values
Protecting the setting values using
[Key Inhibit]
You can protect the setting values using [Key Inhibit].
When the values are protected by the key inhibit
function, you cannot change the values.
To change the values, set [Key Inhibit] to [Off].
For details, see [Key Inhibit] (page 32).
Protecting the setting values using
[Password Lock]
You can protect the setting values of the color
temperature for [User1] and the User Preset for [User
Preset1] using [Password Lock].
When the values are protected with a password, you
need to enter the password during the following
operations.
When you change the color temperature values for
[User1] using [Adjust Gain/Bias] or [Copy From].
When you change the User Preset values for [User
Preset1] using [Save].
For details, see [Password Lock] (page 32).
To Next Page
Loading...
Need help?
General
