Sony RCD-W10 User Manual

13
Basic Operations
Playing Tracks/Discs
Repeatedly (Repeat Play) Z
You can play tracks repeatedly in any play
mode.
Before using the remote, set SELECT to CD
for operations on DECK A, or to CDR for
operations on DECK B.
Repeating all tracks on the
disc
Press REPEAT repeatedly until “REPEAT”
lights up in the display, and then press H.
The unit repeats the discs/tracks as follows:
When the disc
is played in
ALL DISCS
Continuous play
(page 8)
1 DISC
Continuous play
(page 8)
Shuffle Play
(page 14)
Program Play
(page 15)
To stop Repeat Play
Press x.
To cancel Repeat Play
Press REPEAT repeatedly until “REPEAT”
goes off.
The deck repeats
All tracks on all discs.
All tracks on the current disc.
All tracks on the current disc in
random order.
All the same program.
REPEAT
H
SELECT
Notes
• When the unit has repeated tracks in the same play
mode five times, playback stops.
• When “ALL DISCS SHUFFLE” (page 14) is
selected, you cannot repeatedly play all tracks on
the disc (for DECK A of RCD-W50C).
Repeating only the current
track
While the track you want to repeat is being
played, press REPEAT repeatedly until
“REPEAT 1” lights up.
To cancel Repeat 1
Press REPEAT repeatedly until “REPEAT 1”
goes off.
x

Sony RCD-W10 Specifications

Power

North American model power requirements	120 V AC, 60 Hz
Mexican model power requirements	120 V AC, 60 Hz
Other models power requirements	110-120/220-240V AC, 50/60 Hz
Power consumption	25 W

Inputs

ANALOG IN impedance	47 kilohms
ANALOG IN rated input	500 mVrms
ANALOG IN minimum input	250 mVrms

Outputs

ANALOG OUT impedance	47 kilohms
ANALOG OUT rated output	2 Vrms
ANALOG OUT load impedance	over 10 kilohms

Weight and Dimensions

dimensions	430 × 108 × 399 mm
RCD-W50C mass	6.8 kg
RCD-W10 mass	6.0 kg