Sony RCD-W10 User Manual

14
2 Press H.
“;” appears in the display while the unit is
“shuffling” the tracks, and the track is
played.
To stop Shuffle Play
Press x.
To cancel Shuffle Play
While the unit is stopped, press PLAY MODE
until “SHUFFLE” goes off.
Tip
To play from the beginning of the current track again,
turn AMS counterclockwise (or press .on the
remote). You cannot go back to tracks that have
already been played.
Notes
• If “ALL DISCS SHUFFLE” is selected in the
“REPEAT” setting, “REPEAT” is cancelled (for
DECK A of RCD-W50C).
• You cannot change the PLAY MODE during
playback.
Playing in Random Order
(Shuffle Play)
You can have the unit “shuffle” tracks and play
them in random order.
When using the remote, set SELECT to CD for
operations on DECK A, or to CDR for
operations on DECK B.
1 While the unit is stopped, press PLAY
MODE repeatedly to select the Shuffle
Play mode as follows:
When you
select
ALL DISCS
SHUFFLE (for
DECK A of
RCD-W50C)
1 DISC
SHUFFLE (for
DECK A of
RCD-W50C)
SHUFFLE (for
DECK B of
RCD-W50C
and DECK A/B
of RCD-W10)
PLAY MODE
The unit plays
All tracks on all discs in random
order.
All tracks on the current disc in
random order.
All tracks on the disc in random
order.
SELECT
H
PLAY MODE
PLAY MODE
H
H
xx
x

Sony RCD-W10 Specifications

Power

North American model power requirements	120 V AC, 60 Hz
Mexican model power requirements	120 V AC, 60 Hz
Other models power requirements	110-120/220-240V AC, 50/60 Hz
Power consumption	25 W

Inputs

ANALOG IN impedance	47 kilohms
ANALOG IN rated input	500 mVrms
ANALOG IN minimum input	250 mVrms

Outputs

ANALOG OUT impedance	47 kilohms
ANALOG OUT rated output	2 Vrms
ANALOG OUT load impedance	over 10 kilohms

Weight and Dimensions

dimensions	430 × 108 × 399 mm
RCD-W50C mass	6.8 kg
RCD-W10 mass	6.0 kg