Quick Reference
94
A OPEN/ZEJECT lever (p. 19)
B Strap Belt
C Cassette lid (p. 19)
D Tripod receptacle
Make sure that the length of the tripod
screw is less than 5.5 mm (7/32 inch).
Otherwise, you cannot attach the tripod
securely, and the screw may damage your
camcorder.
Using the Strap Belt as a wrist strap
It is useful when you carry your camcorder.
1 Open the hook and loop fastener of the
hand pad (a) and remove it from the
ring (b).
2 Move the hand pad fully to the right (a),
then close the hook and loop fastener
again (b).
3 Use the Strap Belt as shown below.
1
3
2
4
Hand pad
To Next Page
Loading...
