Sony RMT-D175A - Remote Commander and Communication Diagnostics; Remote Key Display and Communication Monitoring; FLD Anode Test and Shuttle Click Test

6-5
DVP-NS72HP/NS77H/NS77HP/NS78H/NS78HP
2-3-1. FLD All ON
2-3-1-1. Transition Keys in Self Check Mode
• Z key and x key on the main unit
• T key on the remote commander
2-3-1-2. Operation and display
In this mode, all segments of FLD turn ON.
• Example of FLD all ON
2-3-2. Main Unit Key Name Display and Key Code Display
2-3-2-1. Transition Keys in Self Check Mode
• Keys on the main unit except keys transited in Self Check Mode
2-3-2-2. Operation and Display
When a key on the main unit is pressed in the Self Check mode, the name of that key is displayed on the FLD. Aslo, the key name display
and the key code display can be switched with the [DISPLAY] key on the remote commander, “KEY FF” is displayed when nothing is
entered. Also, PLAY, PAUSE, REPEAT segments turn on when a communication error occurred.
• Key code display (at input of H key, key code: 0Ah)
• At input of faulty voltage
• When key is pressed double