Sony SGP321 - Sharing Your Mobile Data Connection

To connect to a Wi-Fi® network automatically
1 From your Home screen, tap .
2 Find and tap Settings.
3 Tap Wi-Fi. All available Wi-Fi® networks are displayed.
4 Tap a Wi-Fi® network to connect to it. For secured networks, enter the relevant
password.
is displayed in the status bar once you are connected.
To search for new available networks, tap , and then tap Scan.
To add a Wi-Fi® network manually
1 From your Home screen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Tap .
4 Enter the Network SSID information.
5 To select a security type, tap the Security field.
6 If required, enter a password.
7 To edit some advanced options such as proxy and IP settings, mark the Show
advanced options checkbox and then edit as desired.
8 Tap Save.
Contact your Wi-Fi® network administrator to get the network SSID and password.
Wi-Fi® settings
When you are connected to a Wi-Fi® network or when there are Wi-Fi® networks
available in your vicinity, it is possible to view the status of these networks. You can also
enable your device to notify you whenever an open Wi-Fi® network is detected.
If you are not connected to a Wi-Fi® network, your device uses a cellular data
connection to access the Internet (if you have set up and enabled a cellular data
connection on your device). By adding a Wi-Fi® sleep policy, you can specify when to
switch from Wi-Fi® to cellular data.
To enable Wi-Fi® network notifications
1 Turn on Wi-Fi®, if it is not already on.
2 From your Home screen, tap
.
3 Find and tap Settings > Wi-Fi.
4 Press
.
5 Tap Advanced.
6 Mark the Network notification checkbox.
To view detailed information about a connected Wi-Fi® network
1 From the Home screen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Tap the Wi-Fi® network that you are currently connected to. Detailed network
information is displayed.
To add a Wi-Fi® sleep policy
1 From the Home screen, tap
.
2 Find and tap Settings > Wi-Fi.
3 Press
.
4 Tap Advanced.
5 Tap Keep Wi-Fi on during sleep.
6 Select an option.
Sharing your mobile data connection
You can share your device's mobile data connection with a single computer using a USB
cable. This process is called USB tethering. You can also share your device's data
connection with up to eight other devices at once by turning your device into a portable
Wi-Fi® hotspot. When your device's mobile data connection is successfully shared, the
26
This is an Internet version of this publication. © Print only for private use.