To start One-touch setup on your device
1 From your Home screen, tap .
2 Find and tap Settings > Xperia™ Connectivity > One-touch setup. The NFC
function is automatically turned on.
3 Make sure the NFC function on the other Xperia™ device is turned on.
4 Make sure the screens of both devices are unlocked and active.
5 Hold the two devices together so that the NFC detection area of each device
touches the other. The One-touch setup function launches automatically.
Both devices must support the One-touch setup function.
The front part of your device that corresponds to the NFC detection area (located at the back
of your device) is also NFC enabled. So you can also touch this part of your device to other
devices during NFC transactions.
88
This is an Internet version of this publication. © Print only for private use.
To Next Page
Loading...
