Need help?Do you have a question about the Sony SNC-WR632C and is the answer not in the manual?
Manual is for qualified personnel; follow training for safe operation to avoid hazards.
Avoid electric shock, fire, or injury; only perform servicing described in instructions.
Diagram showing the location of main circuit boards within the camera unit.
Detailed list of screws and their required tightening torque values for assembly.
Step-by-step instructions for removing and installing the camera's outer cabinet components.
Detailed guide for removing and installing major internal parts like boards and assemblies.
Instructions and precautions for using lead-free solder when repairing electronic boards.
Procedures for replacing the SY-416 board, including MAC address and firmware updates.
A flowchart to diagnose operational issues by checking unit startup and basic functions.
Diagnosing power-related problems by checking voltage inputs and outputs of various boards.
Procedures for diagnosing and resolving issues with the camera's pan and tilt mechanisms.
Steps to diagnose problems related to video signal output and display on monitors.
Guide for resolving issues related to network recognition, communication, and SNC toolbox connectivity.
Overview of the roles and functions of the SY-416, PS-858, MD-151, IF-1232, TM-61, CN-3521, and HC-51 boards.
Detailed explanation of the SY-416 board's circuitry, including video input, SoC processing, and communication blocks.
Description of the PS-858 power board, covering its AC/DC conversion and power control functions.
Explanation of the MD-151 board's motor control, microcontroller, and inter-board communication functions.
Details on the HC-51 board's role in temperature control, heater and fan driving, and fan failure detection.
Description of the TM-61 board's functions, including factory-setting switch and terminal connections.
Guidelines regarding safety-critical parts, part commonality, stock availability, and harness registration.
Detailed exploded diagrams showing the assembly of various parts like the top sunshade and dome cover.
List of packing materials, manuals, and accessories included with the unit.
A comprehensive block diagram illustrating the connections between all major internal components and boards.
A detailed diagram showing the electrical connections and wiring paths between various internal components.
Manual is for qualified personnel; follow training for safe operation to avoid hazards.
Avoid electric shock, fire, or injury; only perform servicing described in instructions.
Diagram showing the location of main circuit boards within the camera unit.
Detailed list of screws and their required tightening torque values for assembly.
Step-by-step instructions for removing and installing the camera's outer cabinet components.
Detailed guide for removing and installing major internal parts like boards and assemblies.
Instructions and precautions for using lead-free solder when repairing electronic boards.
Procedures for replacing the SY-416 board, including MAC address and firmware updates.
A flowchart to diagnose operational issues by checking unit startup and basic functions.
Diagnosing power-related problems by checking voltage inputs and outputs of various boards.
Procedures for diagnosing and resolving issues with the camera's pan and tilt mechanisms.
Steps to diagnose problems related to video signal output and display on monitors.
Guide for resolving issues related to network recognition, communication, and SNC toolbox connectivity.
Overview of the roles and functions of the SY-416, PS-858, MD-151, IF-1232, TM-61, CN-3521, and HC-51 boards.
Detailed explanation of the SY-416 board's circuitry, including video input, SoC processing, and communication blocks.
Description of the PS-858 power board, covering its AC/DC conversion and power control functions.
Explanation of the MD-151 board's motor control, microcontroller, and inter-board communication functions.
Details on the HC-51 board's role in temperature control, heater and fan driving, and fan failure detection.
Description of the TM-61 board's functions, including factory-setting switch and terminal connections.
Guidelines regarding safety-critical parts, part commonality, stock availability, and harness registration.
Detailed exploded diagrams showing the assembly of various parts like the top sunshade and dome cover.
List of packing materials, manuals, and accessories included with the unit.
A comprehensive block diagram illustrating the connections between all major internal components and boards.
A detailed diagram showing the electrical connections and wiring paths between various internal components.
General| Type | IP security camera |
|---|---|
| PTZ control | Yes |
| PTZ protocols | Pelco-D |
| Languages support | ARA, CHI (SIMPL), CHI (TR), DEU, ENG, ESP, FRE, HIN, ITA, JPN, KOR, POL, POR, RUS, THA, TUR |
| Placement supported | Outdoor |
| Light exposure modes | Auto, Manual, Shutter priority AE |
| Connectivity technology | Wired |
| IK code | IK10 |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| Housing material | Aluminum |
| International Protection (IP) code | IP66 |
| Pan range | 0 - 360 ° |
| White balance | ATW, Fluorescent, Indoor, Manual, One push, Outdoor, Sodium lamp |
| Tilt angle range | 0 - 220 ° |
| Angle of rotation | 360 ° |
| Camera shutter speed | 1/1 - 1/10000 s |
| Minimum illumination | 0.018 lx |
| Audio formats supported | AAC, G.711, G.726 |
| Signal-to-Noise Ratio (SNR) | 50 dB |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Optical sensor size | 1/2.8 \ |
| Digital zoom | 12 x |
| Optical zoom | 30 x |
| Focal length range | 4.3 - 129 mm |
| Maximum aperture number | 4.7 |
| Minimum aperture number | 1.6 |
| Closest focusing distance | 0.3 m |
| Bit rate control | Constant Bit Rate (CBR), Variable Bit Rate (VBR) |
| Total megapixels | 2.38 MP |
| Gain control type | Auto/Manual |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 1080p |
| Video compression formats | H.264 |
| Analog signal format system | NTSC, PAL |
| Supported graphics resolutions | 352 x 288, 640 x 360, 640 x 480 (VGA), 704 x 576, 720 x 480, 720 x 576, 1024 x 576 (WSVGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080) |
| Compatible memory cards | SD |
| Maximum memory card size | 64 GB |
| Number of users | 20 user(s) |
| Streaming method | Multicast |
| Networking standards | IEEE 802.1x |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IPv4, TCP, UDP, ARP, ICMP, IGMP, HTTP, DHCP, DNS, NTP, RTP/RTCP, RTSP over TCP, RTSP over HTTP, SMTP, IPv6, HTTPS, FTP (client), SNMP (v1, v2c, v3), SSL |
| Cables included | AC, BNC |
| Behavior analysis | Intrusion detection, Object removal detection |
| Intelligent Video Surveillance (IVS) system features | Face detection, Intrusion, Missing object |
| Windows operating systems supported | Windows 7, Windows 8, Windows 8.1, Windows Vista, Windows XP |
| AC input voltage | 24 V |
| Power source type | AC, PoE |
| Power consumption (max) | 80 W |
| Power consumption (Power over Ethernet (PoE)) | 55 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -40 - 50 °C |
| Storage relative humidity (H-H) | 20 - 95 % |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Height | 324.1 mm |
|---|---|
| Weight | 4100 g |
| Diameter | 222 mm |
To Next Page
