To Next PageTo Next Page
Need help?Do you have a question about the Sony SNC-EP521 and is the answer not in the manual?
General| Total megapixels | 0.44 MP |
|---|---|
| Maximum resolution | 720 x 576 pixels |
| Supported video modes | - |
| Video formats supported | H.264, MPEG4 |
| Analog signal format system | PAL |
| Supported graphics resolutions | 320 x 240, 384 x 288, 704 x 576, 640 x 480 (VGA) |
| Pan range | 0 - 340 ° |
| White balance | Auto, Manual |
| Tilt angle range | 0 - 105 ° |
| Camera shutter type | Electronic |
| Camera shutter speed | 1/1 - 1/10000 s |
| Minimum illumination | 0.15 lx |
| Sensor type | CCD |
| Optical sensor size | 1/4 \ |
| Digital zoom | 12 x |
| Optical zoom | 36 x |
| Zoom capability | Yes |
| Focal length range | 3.4 - 122.4 mm |
| Built-in HDD | No |
| Compatible memory cards | SD, SDHC |
| Form factor | Dome |
| Mounting type | Ceiling |
| Product color | Black, White |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| Interface | RJ-45 |
| Ethernet LAN (RJ-45) ports | 1 |
| Cabling technology | 10/100Base-T(X) |
| Supported network protocols | IPv4, IPv6, TCP, UDP, ARP, ICMP, IGMP, HTTP, HTTPS, FTP (client/server), SMTP, DHCP, DNS, NTP, RTP/RTCP, RTSP, SNMP(MIB-2) |
| Compliance industry standards | IEEE802.1x, IEEE802.3at |
| Power source type | PoE |
| Power consumption (typical) | 25 W |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -5 - 50 °C |
| Minimum RAM | 1024 MB |
Weight and Dimensions| Height | 190.9 mm |
|---|---|
| Weight | 1700 g |
| Diameter | 147.4 mm |
Details network camera capabilities: image quality, frame rates, compression modes, pan/tilt, zoom, and detection functions.
Contains legal notices, copyright information, software disclaimers, and warranty limitations.
Details the process of assigning a new IP address to the camera for initial network connectivity and setup.
Instructions for connecting to and viewing the camera's interface through a web browser on a computer.
Defines roles, access rights, and available functions for Administrator and User accounts.
Step-by-step guide for users to log into the camera system and access its monitoring and control functions.
Details the components and controls of the main viewer interface, including panels and display settings.
Explains how to use the camera control panel for pan/tilt, zoom, focus, and other operational adjustments.
Explains the basic operations and structure of the Administrator menu for camera configuration.
Provides step-by-step instructions on how to access, log in, and configure the Administrator menu.
Details system-wide settings such as date/time synchronization, Superimpose, and exclusive control modes.
Configures network connection details such as MAC address, Ethernet status, Auto-MDI/MDIX, and IPv4/IPv6 settings.
Covers IP address, subnet mask, default gateway, DNS server, MTU, and host name configurations.
Enables SSL/TLS for secure communication, managing certificates for encrypted connections.
Configures wired/wireless port-based authentication using 802.1X standards and digital certificates.
