SNC-EP520/EP521/EP550/EP580/ER520/ER521/ER550/ER580/ER585/ER585H/ZP550/ZR550
Preparation
Assigning the IP Address to the Camera
7
Preparation
The Preparation section explains what the administrator
has to prepare for monitoring images after installation
and connection of the camera.
Assigning the IP
Address to the Camera
To connect the camera to a network, you need to assign
a new IP address to the camera when you install it for the
first time.
Before starting, connect the camera, referring to
“Connecting the Camera to a Local Network” in the
supplied Installation Manual.
Consult the administrator of the network about the
assigned IP address.
Assigning an IP address using SNC
toolbox
1
Insert the CD-ROM in your CD-ROM drive.
A cover page appears automatically in your Web
browser.
If it does not appear automatically in the Web
browser, double-click the index.htm file on the
CD-ROM.
When you are using Windows Vista, the “Auto
play” pop-up may appear.
2
Click the Setup icon of SNC toolbox.
The “File Download” dialog appears.
3
Click File Open.
4
Install “SNC toolbox” on your computer using the
wizard.
For details of the software installation and usage,
see the Application Guide.
5
Assign the IP address.
Assign the IP address using the installed SNC
toolbox.
For details, see “Using the SNC toolbox” -
“Assigning an IP address” in the Application
Guide.
Tips
• Download the latest installer or Application Guide of
SNC toolbox from the following URL:
http://www.sony.net/ipela/snc
• SNC toolbox stands for Sony Network Camera
toolbox.
To Next Page
Loading...
