Sony SPP-A400 - Making Calls with Speed Dialing

Telephone Features
15
EN
Telephone Features
Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• When the battery pack in the handset is completely discharged or is removed
from the handset, the stored numbers will be erased.
Tips
• If you enter a wrong number, press (PGM), then start from the beginning.
• Use the supplied directory to write down what you stored on the speed
dialing numbers.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in Step 4 on page 14, do as follows:
1 Enter the outside line access digit (e.g., 9).
2 Press (REDIAL/PAUSE).
To change a stored number
Store a new number, as described on the previous page.
Making calls with speed dialing
1 Press (TALK) and wait until the TALK/BATT LOW lamp
lights up.
2 Press (SPEEDDIAL).
3 Enter the desired speed dialing number ((0) to (9)).
The phone number stored in the speed dialing number will
be dialed.