Help Guide
Multi Channel AV Receiver
STR-AZ1000ES
Selecting the BLUETOOTH mode (Bluetooth Mode)
You can enjoy content from remote devices via this unit, or listen to sound from this unit via a BLUETOOTH receiver such as headphones
or speakers.
Note
[Bluetooth Mode] cannot be switched while the input of this unit is set to [Bluetooth Audio].
No sound is output from the speakers connected to this unit when [Bluetooth Mode] is set to [Transmitter].
In [Transmitter] mode, this unit can send audio to up to 1 device.
Hint
You can set the transmission data rate for LDAC playback using [Wireless Playback Quality] in the [Bluetooth Settings].
If you connect to this unit from your smartphone while [Transmitter] is selected and no other BLUETOOTH receiver is connected to this unit, the
setting automatically switches to [Receiver] and you can listen to the sound from your smartphone via this unit.
You can also switch between BLUETOOTH RX (Receiver) mode and BLUETOOTH TX (Transmitter) mode by pressing BLUETOOTH TX/RX on the
remote control.
Depending on the BLUETOOTH receiver, you can adjust the volume of the BLUETOOTH receiver from this unit when [Transmitter] is selected.
5-037-020-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [Bluetooth Settings] from the home menu.
1
Select [Bluetooth Mode].
2
Select the setting you want.
Receiver: This unit is in receiver mode which enables it to receive and output audio from a BLUETOOTH device.
Transmitter: This unit is in transmitter mode which enables it to send audio to a BLUETOOTH receiver (headphones/speakers).
[BT TX] appears on the display panel.
Off: The BLUETOOTH power will be turned off and you will not be able to use the BLUETOOTH function.
3
To Next Page
Loading...
