Help Guide
Multi Channel AV Receiver
STR-AZ1000ES
Setting the volume control for Zone 3 (Zone3 Line Out)
You can set variable or fixed volume control for the AUDIO ZONE 3 OUT jacks.
Note
When [Variable] is set, the volume level is turned down by default. Turn up the volume while listening to the sound after completing setup. The volume
for the SPEAKERS SURROUND BACK/HEIGHT (FRONT B/BI-AMP/ZONE 3) terminals is changed together with the volume for the AUDIO ZONE 3
OUT jacks.
Related Topic
Enjoying sound using another amplifier in Zone 3
5-037-020-11(1) Copyright 2022 Sony Corporation
Select [Setup] - [Zone Settings] from the home menu.
1
Select [Zone3 Line Out].
2
Select the setting you want.
Variable: Select when you cannot adjust the volume level on the amplifier in Zone 3. The volume level of the output from AUDIO
ZONE 3 OUT jacks on the rear of the unit will become adjustable.
Fixed: Select to adjust the volume on the amplifier in Zone 3. The volume level of the output from AUDIO ZONE 3 OUT jacks on
the rear of the unit will be fixed.
3
To Next Page
Loading...
