Help Guide
Multi Channel AV Receiver
STR-AZ1000ES
Enjoying sound using another amplifier in Zone 3
You can enjoy sound from the amplifier in Zone 3 by the following procedure.
Hint
You can also activate Zone 3 using ZONE SELECT and ZONE POWER on the unit.
You can also select source signals you want to output using INPUT SELECTOR on the unit while [3. xxxx (input name)] is shown on the display panel
by repeatedly pressing ZONE SELECT on the unit.
You can also adjust volume using MASTER VOLUME on the unit while [3. xxxx (input name)] is shown on the display panel by repeatedly pressing
ZONE SELECT on the unit.
To exit Zone 3 function
Press ZONE 3
(power) on the remote control to turn off the Zone 3 power.
To exit Zone 3 operation
Select [Zone Controls] - [Zone3] - [Power] from the home menu, then select [Off].
Available inputs and functional restrictions in Zone 3
See “Available input sources for each zone.”
Hint
A dedicated App Sony | Music Center enables easier zone operation such as changing the settings or switching the zone inputs from your
smartphone or tablet.
Related Topic
Connecting another amplifier in Zone 3
Setting the volume control for Zone 3 (Zone3 Line Out)
5-037-020-11(1) Copyright 2022 Sony Corporation
Select [Zone Controls] - [Zone3] - [Power] - [On] from the home menu.
Zone 3 is activated.
1
Turn on the amplifier in Zone 3.
2
Select the input of the source signal you want to output in [Input] of [Zone3].
If you want to hear the same sound as the main zone in zone 3, select [SOURCE].
3
Start playback on the input device that you selected in step 3.
4
Adjust to a suitable volume level.
Adjust the volume level on the amplifier in Zone 3. If you set [Zone3 Line Out] in [Zone Settings] menu to [Variable], you can also
adjust the volume level in Zone 3 using [Zone Controls] - [Zone3] - [Volume] from the home menu.
5
To Next Page
