Sony STR-D2010 - User Manual

SERVICE MANUAL tei
Canadian Model
SPECIFICATIONS
Other Specifications
Amplifier section
AUDIO POWER
SPECIFICATIONS
8 ohms, 195 + 195 watts
POWER
OUTPUT
AND
TOTAL
HARMONIC
ieee
al
With
8-ohm
load,
both
channels
driven,
earn
a
tS
Dynamic
power output
from 20 ~ 20,000 Hz, rated 130 watts per Intermodulation (IM) distortion at Less than 0.008%
channel minimum RMS power, with no rated output
more
than
0.008%
total
harmonic
Frequency
|
PHONO
RIAA
+0.5
dB
. . sone response equalization curve
distortion from 250 milliwatts to rated pn eo (eee
output. 2,
DIGITAL (OPTICAL/
COAXIAL)
VIDEO 1, 2,3
Damping factor (8 ohms, at 1 KHz) | 50
Input PHONO MM 3 mV, 50 kilohms
sensitivity/ | DaT. CD, VIDEO | 200 mV 50 kilohms
inpedance | 4,2, 3 TAPE 1,2
DIGITAL (COAXIAL)| 0.5 Vp-p, +20%, 75 ohms
DIGITAL (OPTICAL); TOSLINK
DAT OUT TAPE 200 mV 10 kilohms
OUT 1, 2 VIDEO 1
SPEAKERS Accepts speakers of 8 - 16 ohns
HEADPHONES Accepts headphones of high an low
impedance
MUTING -20 dB
— continued on next page —
_ FM STEREO/FM-AM RECEIVER
rol ONY.
Output
sensitivity/
impedance

Sony STR-D2010 Specifications