Sony STR-DA5600ES - Page 141

141
GB
Adjusting Settings
To change the display
You can check the sound field, etc., by
changing the information on the display.
1 Select the input for which you want to
check the information.
2 Press DISPLAY repeatedly.
Each time you press DISPLAY, the display
will change as follows.
Input you selected t Sound field type t
Stream information* t Input name you
entered ...
* Stream information may not be displayed.
When listening to FM and AM radio
Station name t Frequency t Sound field
type...
Index name appears only when you have
assigned one to the input or preset station.
Index name does not appear when only
blank spaces have been entered.
When tuning in a channel from SIRIUS
(USA/Canadian model only)
Channel name t Channel number t
Category t Artist name t Song title t
Composer name t Signal strength t
Sound field type
When receiving RDS broadcasts (European
model only)
PS (Program Service name)
1)
, Preset name,
Band, or Preset number t Frequency,
band and preset number t PTY (Program
Type) indication
2)
t RT (Radio Text)
indication
3)
t CT (Clock Time) t Sound
field type
1)
This information also appears for non-RDS
FM stations.
2)
Type of program being broadcast
3)
Text messages sent by the RDS station.
HDMI
SETTINGS
CTRL FOR HDMI [xxx] ON, OFF OFF
PASS THROUGH [xxxx] ON, OFF OFF
H.A.T.S. [xxx] ON, OFF ON
AUDIO OUT [xxxxxx] AMP, TV+AMP AMP
SW LEVEL [xxxdB] AUTO, +10 dB, 0 dB AUTO
SW LPF [xxx] ON, OFF ON
VIDEO DIRECT [xxx] ON, OFF OFF
SYSTEM
SETTINGS
NAME IN ? [xxxxxxxx]
RS232C CONTROL [xxx] ON, OFF OFF
AUTO STANDBY [xxx] ON, OFF ON
VERSION [x.xxx]– –
UPDATE(PC) [xxxxxx] PERMIT, DENY DENY
Menu Item Parameter Initial
setting