Sony STR-DA5600ES - Specifications; AUDIO POWER SPECIFICATIONS

169
GB
Additional Information
Reference sections
To clear the memory of the
simple remote commander
After removing the batteries, do not use the
remote for a few minutes.
Refer to the following web site for details of
the latest information on the receiver.
For customers in the United States and
Canada:
http://www.sony.com/essupport
For the customers in Europe:
http://support.sony-europe.com/quickjump/
STR
Specifications
AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 130
3)
watts per channel
minimum RMS power, with no more than
0.09% total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
1) 2)
(8 ohms 20 Hz – 20 kHz,
THD 0.09%):
130 W + 130 W
3)
120 W + 120 W
4)
Reference Power Output at Stereo Mode
(4 ohms 20 Hz – 20 kHz,
THD 0.15%):
130 W + 130 W
3)
120 W + 120 W
4)
Reference Power Output
(8 ohms 1 kHz, THD 0.7%)
FRONT
2)
:
140 W + 140 W
3)
130 W + 130 W
4)
CENTER
2)
: 140 W
3)
130 W
4)
SURROUND
2)
:
140 W + 140 W
3)
130 W + 130 W
4)
SURROUND BACK
2)
:
140 W + 140 W
3)
130 W + 130 W
4)
Reference Power Output
(4 ohms 1 kHz, THD 0.7%)
FRONT
2)
:
130 W + 130 W
3)
120 W + 120 W
4)
CENTER
2)
: 130 W
3)
120 W
4)
Clearing the memory
To clear See
All memorized settings page 43
Multifunction remote
commander
page 160
About support information
continued